I need a way to clean expanded clay pellets in a cannabis production facility with minimal water. I think vibration and tumbling will work. We clean and sterilize as many as 3 tons of clay pellets per week. What do you recommend?

Asked in:

Vibratory tables are one of the best ways to remove debris from product to ensure that you have clean material. For this application we recommend using a linear non-impacting pneumatic vibrator such as the NTS™ Series to power a compaction… Learn More


We are trying to maximize recovery of a thick personal care liquid from a portable, stainless-steel, cone-bottomed tank that holds between 8,000 and 9,000 pounds. Can you recommend the best product for this application?

Asked in:

Sticky product clinging to the sides of cone bottom tanks can create headaches and product loss. Our NTS linear non-impacting pneumatic vibrators that are machined from a teflon alloyed aluminum are the perfect solution for applications that need help with… Learn More


We are a producer of artisan cheeses. Many of these are produced as 10-pound waxed wheels that are then cut into various sized wedges prior to packaging. The cutting is done using a hydraulically-driven harp that is driven down through the cheese wheel and the harp contains anywhere from 4 to 20 fixed partitions (knife segments). This system works well except that it has a tendency to fracture the wax and damage some of the harder cheeses, creating a lot of unusable pieces. This damaging effect increases as the number of knife segments increases. Since the majority of our production utilizes a 20-partition knife, the losses and rework are significant. I believe that mounting a turbine vibrator to the side of the cutting harp may reduce or even eliminate the damage. What do you think?

Asked in:

­Any way to reduce product waste and decrease rework is worth the effort. Our NCT rotary turbine line of vibrators would transmit the perfect amount of vibration through the cutting harp to eliminate the damage caused by increasing the number… Learn More


I am working on a project that needs a vibration bed. The application is a cleaning system for small parts with internal machined passageways. I will be pumping a cleaning solution through the part and need to vibrate all small particles loose inside the part. Do you have a suggested product for this?

Asked in:

Agitating parts is best left to an automated solution in order to reduce the risk of personnel injury. This is where a vibratory compaction table that is integrated into your manufacturing line comes into play. Given the small size of parts… Learn More


We’re trying to minimize product loss and waste by placing an inverted container in a vibrating wire basket to minimize residue left in the container. What’s the best product for this?

Asked in:

Minimizing residue left in a container is one of the easiest ways to reduce wasted product and increase profits. Mounting one of our NCT series of pneumatic rotary turbine vibrators to your wire basket would allow for an efficient transfer… Learn More


We work with the aluminum industry to optimize the vibrocompaction of anode forming. We’re looking for information about vibrating tables that can help with this application.

Asked in:

Vibratory tables have a wide variety of applications in nearly every industry. For this application we recommend using a linear non-impacting pneumatic vibrator such as the NTS™ Series to power the vibratory table. Please contact one of our Application Engineers at… Learn More


We are designing a crumb tamper for various crumb crusts in the baking industry. We are concerned that the crumbs will stick to the tooling and hoping that a vibrator might be used to help the crumbs release from the tooling. The product needs to be stainless steel and food-safe.

Asked in:

Repeatedly tapping a tool set can be tedious and can cause long term health issues for your operators. Our PKL line of pneumatic interval impactors is the perfect tool for the job. Since our impactors are sized out for each… Learn More


We have a customer that has specified Netter vibration equipment to be used for a manual sieving and conveying system for dry crushed minerals. We’d like all the vibrators to be electric. Can you help us determine what products to use?

Asked in:

Efficiently sieving products requires both linear and rotary vibration, which is difficult for a vibrator to produce. Depending on how your sieve is designed, our line of NTS linear non-impacting pneumatic vibrators that are machined from a teflon alloyed aluminum… Learn More


We have a seed ladder on a conveyor. When it turns off, there are a few beans that stick to the ladder that ultimately end up on the floor. We would like to add a shaker to the line so that the soybeans will drop immediately into the trailer. Can you help?

Asked in:

Product hanging up can create a mess when moving equipment around a facility. Our line of NTS linear non-impacting pneumatic vibrators that are machined from a teflon alloyed aluminum are the perfect solution for applications that need help with product… Learn More


We are an optical lens polishing machine manufacturing company. Some of our customers would like motion added to our current design. Could your products work for this application?

Asked in:

Depending on the type of motion needed, a vibrator could be of assistance in your current design. Vibrators can produce linear or rotary force and have endless uses in every industry. Due to this being a unique application for a… Learn More