Available in Stainless Steel

MARTIN® CD Series Vibrators are designed and built to withstand the rigors of the industrial environment and operate in a continuous duty cycle.

This series is so tough we guarantee them for 3 years even when operated at 100% amplitude setting, in a 24/7 operating environment.

Each vibrator is manufactured using the latest automated techniques, insuring exact bearing and seal fits. Add vacuum impregnated windings and you have a high performance vibrator second to none.

Each one comes with a 3 year warranty.

CD™ SERIES ELECTRIC VIBRATORS
PERFORMANCE DATA AND DIMENSIONS
3600 RPM Dimensions (in.)
Model Number Max Force Lbs. Amp Draw A B C D E F G
115 V. 1-h 60 Hz. starting capacitors & 20' of cable included
CDS36-380 385 1.52 8.31 6.02 4.92 2.44-2.91 4.17 0.95 0.35
CDS36-480 482 1.52 9.25 6.02 4.92 2.44-2.91 4.17 0.95 0.35
CDS36-660 653 2.4 10.04 7.05 5.98 3.54 4.92 1.1 0.51
CDS36-1050 1034 4.5 11.34 7.99 6.57 4.13 5.51 1.18 0.51
CDS36-1660 1660 7 15 8.27 8.07 4.72 6.69 1.77 0.67
230/460 V. 3-Ph. 60 Hz.
CDS36-380 385 0.60 / 0.30 8.31 6.02 4.92 2.44-2.84 4.17 0.95 0.35
CDS36-480 482 0.60 / 0.30 9.25 6.02 4.92 2.44-2.84 4.17 0.95 0.35
CDS36-660 653 1.0 / 0.50 10.04 7.05 5.98 3.54 4.92 1.1 0.51
CDS36-1050 1034 1.60 / 0.80 11.34 7.99 6.57 4.13 5.51 1.18 0.51
CDS36-1660 1660 2.0 / 1.0 12.09 8.27 8.07 4.72 6.69 1.77 0.67
CDS36-2900 2923 3.8 / 1.9 14.21 8.37 8.46 3.94 7.09 1.85 0.67
CDS36-3280 3267 4.0 / 2.0 16.93 9.06 9.06 5.51 7.48 1.93 0.67
CDS36-4100 4083 6.0 / 3.0 18.31 9.06 9.06 5.51 7.48 1.93 0.67
CDS36-4910 4901 6.0 / 3.0 18.31 9.06 9.06 5.51 7.48 1.93 0.67
1800 RPM Dimensions (in.)
Model Number Max Force Lbs. Amp Draw A B C D E F G
115 V. 1-h 60 Hz. starting capacitors & 20' of cable included
CDS18-100 97 0.2 8.31 6.02 4.92 2.44-2.84 4.17 0.95 0.35
CDS18-180 169 0.2 9.25 6.02 4.92 2.44-2.84 4.17 0.94 0.35
CDS18-480 471 .04 11.83 7.05 5.98 3.54 4.92 1.1 0.51
CDS18-920 904 0.6 13.54 7.99 6.57 4.13 5.51 1.18 0.51
230/460 V. 3-Ph. 60 Hz.
CDS18-100 97 0.40 / 0.20 8.31 6.02 4.92 2.44-2.84 4.17 0.95 0.35
CDS18-180 169 0.40 / 0.20 9.25 6.02 4.92 2.44-2.84 4.13 0.94 0.35
CDS18-480 471 0.80 / 0.40 11.83 7.05 5.98 3.54 4.92 1.1 0.51
CDS18-920 904 1.20 / 0.60 13.54 7.99 6.57 4.13 5.51 1.18 0.51
CDS18-1310 1302 1.20 / 0.60 15.2 7.99 6.57 4.13 5.51 1.18 0.51
CDS18-1670 16732 2.0 / 1.0 15 8.27 8.07 4.72 6.69 1.77 0.67

Features

Quiet

Operates at 60 – 70 dBA, the same as a standard electric motor. Air driven piston vibrators operate as high as 120 dBA.

3-Year Warranty

All MARTIN® CD-Series Electric Vibrators carry a full 3-year warranty when operated within factory recommendations.

Built to Last

Vacuum impregnated windings, o-ring seals, and machined surfaces provide an IP 66 rating to protect against the entry of dirt or water, virtually eliminating the possibility of failure.


Additional Specifications

  • Operating Temperature: 3 Phase: -22° – 104° F, 1 Phase: 32° – 104° F.
  • Adjustable Output: Weights can be positioned for precise control of force.
  • Force (maximum): 20,000 force-lbs.
  • Included: 115 Volt Single Phase units include starting capacitor and cord set.

CD Series Vibrator Spec Sheet Download

Best uses and cases studies for CD™ Series Electric Vibrators

  • Flow Problems Solved with MARTIN® CD™ Series Electric Vibrators
    Problem

    A large manufacturer of metal shelving was experiencing a parts flow problem on a sheet metal press. The parts being stamped were plugging the die which caused frequent quality problems and “die” damage.

    Situation

    A temporary solution was to have a worker stand on the other side of the press and manually pull hung-up parts with a hook – a tedious, costly, and potentially dangerous solution.

    Solution

    MARTIN® Vibration Systems designed a vibrating chute using two MARTIN® CD™ Series 18-70 Electric Vibrators. Parts now flow without trouble. Since using our vibrators, the manufacturer has been able to increase production and move their workers to a much more needed and productive role.

  • MARTIN® CD™ Series Vibrator Prevents Production Breaks
    Problem

    A North Carolina material stone quarry was having a problem with their pug mill plugging up and shutting down production.

    Situation

    The existing rotary electric vibrators that installed on the pug mill were not sized properly, which required them to operate at maximum output. This resulted in frequent motor failures and the failure of bearings.

    Solution

    MARTIN® Vibration Systems replaced their existing electric vibrators with two MARTIN® CD™ Series 36-1660 Vibrators, both of which were installed on the pug mill. Each vibrator was mounted to a 3/4″ thick mount plate which was solid welded to an “I” beam. In turn this “I” beam was stitch-welded vertically to the opposite sides of the pug mill and wired to the motor control center. Great care was taken in mounting the vibrator to the mount plate. The results are that the output became smooth with no plugging or build-up, which no longer required them to shut down production.

  • Peanut Packing Requires Minimal Damage Vibration
    Problem

    A manufacturer of stainless food handling equipment was having a problem with product damage in the handling of Spanish-style peanuts.

    Situation

    The stainless storage bin metered on to a belt at various rates depending on package size. They would hammer this bin with a rubber mallet to induce heavier flow for larger packaging.

    Solution

    The addition of a MARTIN® CD™ Series 18-470 Vibrator (set to the lowest setting) moves the product smoothly with minimal damage. The manufacturer has since standardized on our products.

  • Ostrich Farm Needs Help Removing Waste
    Problem

    An ostrich farm was searching for a faster and more efficient way to remove unwanted waste from their many ostrich pens throughout the property.

    Situation

    The farm’s previous method utilized a screen, and it required the tedious task of tilting and shaking the waste by hand. It had been situated on a 4′ × 8′ golf cart trailer for portability, and the tires were used as a vibrating mechanism between the ground and the trailer.

    Solution

    Ultimately, the solution was to attach our vibrator model MARTIN® CD™ Series 36-390 to the center of the reinforced screen frame, with it tightly secured to the trailer. The material now easily flows through the screen and can be re-spread again upon removal of the screen. The operation must be performed daily, and now it is completed by only one person in just one-fourth of the time.