Vibratory Feeders and Hoppers

Fast, Accurate Container Filling Without Hand Scooping

MARTIN^® E-Z™ Auto Scoop Filling System

Accurate, user friendly, and holds tight tolerances.

Eliminate repetitive hand scooping and speed up your filling process with the E-Z™ Auto Scoop Filling System. Designed for operator safety and efficiency, this system automates the filling of containers — reducing repetitive motion injuries and boosting output.

Simply place your container on the scale and step on the foot switch. In seconds, the E-Z™ Auto Scoop dispenses product quickly and accurately, every time. Custom hopper and feeder sizes are available to perfectly align with your product and workflow.

The E-Z™ Auto Scoop Filling System is ideal for:

Food and ingredient packaging
Applications where hand filling may lead to injury or inaccuracy

Key Benefits

Fast, accurate dispensing with minimal operator effort
Reduces risk of repetitive motion injuries
Increases productivity and consistency

Features

Simple foot switch operation
Compatible with a wide range of container sizes
Custom hopper/feeder sizes and configurations available
Durable, easy-to-clean construction

Product Specs

Capacity: 0.9 – 4.1 cu. ft.

What’s Included

E-Z™ Auto Scoop Filling System
Foot switch control
Custom hopper/feeder (as specified)
30-day money-back guarantee [Details]
3-year warranty

Gallery

The E-Z™ Auto Scoop Filling System eliminates the need for scooping and filling containers by hand, which can cause repetitive-motion injuries.

The E-Z™ Auto Scoop fills to the desired target weight, which is easy and fast to change as needed.

See how this customer increased their packaging rate from one package per minute to six, using the E-Z™ Auto Scoop Filling System.

Accurate, user friendly, and holds tight tolerances.

E-Z™ Auto Scoop Filling System

E-Z™ Auto Scoop Filling System

Downloads and Specifications

E-Z™ Auto Scoop Filling System Spec Sheet

E-Z Fill Station Dimensions
						Air Consumption CFM (L/MIN)
A	B	C	D	E*	30PSI (2BAR)	60PSI (4.1BAR)
30(762)	36(914)	36(914)	43(1092)	71(1803)	.49(14)	1.25(57)
inches (mm)	*sizes may vary depending on hopper or scale location (L/MIN)

Case Studies

MARTIN® E-Z™ Auto Scoop Filling System Reduces Labor Costs & Increases Production

Situation

A leading Midwest supplier of aeration technologies and natural treatments to maintain ponds and lakes had a need to reduce labor cost and increase production on the containers they were filling. Currently they were using five people for months at a time during the busy season, filling buckets by hand with a simple bench scale. Workers would scoop these products from 40-60 pound bulk containers and fill retail-size containers, typically taking about 1-2 Minutes per depending on size.

Solution

The MARTIN^® E-Z™ Auto Scoop Filling System incorporates a precision digital scale with programmable logic and a high-performance vibratory feed system that assures fast and consistent flow of material. The system was developed for small to medium-sized packagers, but has proven capable of 750 fills per hour (depending on the material and package size), an average of more than a dozen per minute.

MVSS supplies both loss-in-weight feeders and volumetric feed/weigh systems. Customers find benefit in the company’s worldwide network of parts and service, and from the use of industry-standard components and non-proprietary software.
Labor Costs Reduced By 50%

A chemical supplier was experiencing high labor costs when filling containers by hand. The operator positioned 1 & 1.5-pound containers on a scale and scooped material into the containers, by hand, until the weight was reached.

A special MARTIN^® E-Z™ Weigh System was developed. The operator now places the containers on the scale and pushes a foot switch. The scale logic tares the scale to zero and then activates the MARTIN^® E-Z™ Feeder. When the scale is satisfied the feeder is stopped and the operator removes the filled container. Labor costs were reduced by 50%, spillage is greatly reduced as is the overfill of the containers.
MARTIN® E-Z™ Auto Scoop Filling System Streamlines Bagging of Flour from Bulk Hopper
Situation

A client’s packaging operation involves transferring flour from a bulk storage hopper into individual retail bags. The process demands precise flow control to ensure each bag is filled accurately without spillage, dust, or product loss.

Problem

Manual or uncontrolled flow from the bulk hopper often led to overfills, underfills, and dust generation. Operators had to constantly monitor and adjust the flow, slowing the packaging line and increasing waste. Additionally, cleanliness and consistency were critical due to food safety requirements.

Solution

On advice from the application experts at Martin Vibration Systems & Solutions, the client integrated a MARTIN® E-Z™ Auto Scoop Filling System to provide a controlled, metered feed of flour directly into each bag. The system’s compact footprint fit easily into their existing line, and its gentle vibration provided a smooth, even flow of fine flour without compacting or clumping the material.

With the E-Z™ Auto Scoop in place, the client achieved these positive results:
- Accurate fill control
- Improved sanitation
- Dust-free operation
- Increased throughput