FAQ
Can I try a vibrator before I commit?
Asked in: FAQ
Most products from Martin Vibration Systems & Solutions are available with a free 30-day trial and a money-back guarantee, and many ship immediately from our Marine City, MI warehouse. Learn More
Can I use more than one vibrator on a vessel?
Asked in: FAQ
Yes. Large bins, long chutes, and difficult materials often need multiple units or a combination of types. Our application engineers will recommend the best vibrator, or combination of vibrators, for your application. Learn More
Is pneumatic or electric more cost-effective?
Asked in: FAQ
It depends on your air supply, duty cycle, and energy costs. Pneumatic units are typically simpler and lower in upfront cost, while electric units can be more economical for continuous, all-shift operation. Our engineers can compare both for your plant. Learn More
Can an improperly-specified vibrator make a flow problem worse?
Asked in: FAQ
Yes. Running a vibrator while the outlet is closed, or when no material is discharging, packs material tighter instead of loosening it. The wrong frequency or force can do the same. That is why vibrators are usually set up to… Learn More
When is an impactor better than a vibrator?
Asked in: FAQ
When material does not respond to continuous vibration, when continuous vibration would pack it tighter, or when buildup only needs to be cleared periodically. Learn More
Should I choose an impacting or non-impacting vibrator?
Asked in: FAQ
Non-impacting vibrators are quieter, gentler on vessels, and less likely to compact powders. Impacting vibrators create higher acceleration to knock sticky material free. Your application engineer will recommend the right approach based on how your material behaves. Learn More
What is the difference between a rotary and a linear vibrator?
Asked in: FAQ
A rotary vibrator spins a mass to produce circular force, typically at high frequency, which suits fine, dry materials. A linear vibrator drives a piston along one axis, concentrating force in a single direction for moving, settling, or loosening material. Learn More
Which vibrator type works best for hopper cleanout?
Asked in: FAQ
It depends on the material and equipment. Non-impacting linear vibrators work well for hopper clearing of free-flowing dry residue from bin and hopper walls. Continuous impacting or interval impacting vibrators are better suited for sticky, caked, or heavily adhered materials… Learn More
Can vibration help with allergen control between product runs?
Asked in: FAQ
Yes. In food manufacturing, allergen cross-contamination is a serious compliance and safety risk. Vibration promotes complete material discharge from hoppers, bins, and feeders before a product changeover, reducing allergen carry-over risk and improving the effectiveness of subsequent cleaning steps. Learn More
Why should vibration be used before wash-down rather than during it?
Asked in: FAQ
Vibration is most effective at residual material removal before water is introduced. Once material gets wet it can become more adhesive and harder to remove, and it goes directly into the wastewater stream — increasing disposal costs and creating potential… Learn More