fbpx
Bulk Material Handling Solutions for the U.S., Canada and Latin America
Ask the Experts for Application Assistance
Bulk Material Handling Solutions for the U.S., Canada and Latin America
Ask the Experts for Application Assistance
What type of vibrator works best for damp or sticky materials?

Asked in:

Low-frequency, high-amplitude vibration from pneumatic linear vibrators is often effective for damp, cohesive materials, while interval impactors help with caked or frozen material. The best choice depends on the specific material and equipment, so it is worth reviewing your application… Learn More


Can vibration make wet material worse?

Asked in:

It can if used incorrectly. Running a vibrator while the outlet is closed may pack damp material more tightly. Vibrators are most effective when operated while material is discharging and matched to the material’s behavior. Learn More


How do I stop ratholing in a hopper?

Asked in:

Ratholing happens when material flows only through a narrow channel above the outlet while damp, sticky material stays stuck to the walls. Limiting moisture pickup, using steeper or smoother hopper walls, and mounting a hopper vibrator on the sloped section… Learn More


What is the difference between bridging and caking?

Asked in:

Bridging is an arch of material that forms over a hopper outlet and stops flow. Caking is the bonding of particles into hard lumps or solid layers, often caused by moisture absorption followed by drying. Caked material can make bridging… Learn More


Why does my material flow fine in winter but not in summer?

Asked in:

Hygroscopic materials absorb water from humid air. Higher summer humidity can raise moisture content in storage even when no water is added, increasing cohesion, wall buildup, and caking. Learn More


Does more moisture always make bulk materials flow worse?

Asked in:

No. Flow typically gets worse as moisture rises from dry to moderately damp, because liquid bridges pull particles together. At very high moisture, the spaces between particles fill with water and the material can begin to behave more like a… Learn More


How is vibration testing used for appliances like washing machines and refrigerators?

Asked in:

Appliances face vibration at two stages. Before they reach the customer, they’re shaken during shipping, so manufacturers use vibration test tables to simulate truck and rail transport and confirm that the product and its packaging survive the trip. Once installed,… Learn More


Why is packaging insert testing important?

Asked in:

Packaging inserts — foam, molded pulp, and similar cushioning materials — are designed to absorb impact and protect products in transit. If they’re undertested, products arrive damaged. If they’re over-engineered, packaging costs are unnecessarily high. Vibration testing validates that packaging… Learn More


Can the same vibration test equipment handle both small electronics and large industrial components?

Asked in:

Yes, within the right equipment configuration. Frequency and amplitude are independently adjustable, so test parameters can be tuned across a wide range. Smaller, lighter products typically require higher frequency and lower amplitude, while heavier assemblies like transmissions or appliances need… Learn More


What is the difference between shock testing and vibration testing?

Asked in:

Vibration testing subjects a product to continuous, repeating mechanical oscillation — simulating conditions like road vibration, operational equipment movement, or shipping by truck or rail. Shock testing applies a sudden, high-force impact to simulate drops, impacts, or abrupt handling events.… Learn More