|
Applications
The VibroScanner is used to measure the acceleration and the dominant frequency of mechanical vibrations by means of an acceleration sensor.
Possible applications are the measurement of the operation of all parameters of vibration systems, e.g. frequencies and effective accelerations in vibration feeders and conveyors, vibration compactors or vibration test systems.
Thereby, the VibroScanner permits a quantitative process control on a regularly basis, those contributing essentially to the long successful operation of the vibration system. Moreover, it makes it possible for plant manufacturers to perform batch controls in bib ration drives in order to ensure a consistent product quality.
Design and function
The sensor used is a capacitive micro-mechanical (MEMS) sensor characterized by high mechanical strength. The signal processing takes place directly in the sensor housing, thus reducing considerably the sensitivity to electrical interference.
Admissible operation conditions
Operating voltage: 9 V battery
Ambient temperature: -20 degrees to 40 degrees C
Martin Vibration offers the accessories required for the mounting, installation, control and monitoring of vibrators and impactors.
|
