MARTIN® VAC-MOUNT™ Portable Vibrators

Instant vibration! No welding! No downtime!

MARTIN® VAC-MOUNT™ Portable Vibrators are the answer for applications where ease of installation and/or maximum portability is required. The mounts are held in place by vacuum generated by a venturi system. Just place the unit against the vessel, turn the suction valve handle and you are ready to vibrate. This is the ideal solution for intermittent flow problems or for cleaning between batches. MARTIN®VAC-MOUNT™ Vibrators are the perfect tools for troubleshooting material-flow problems.

MARTIN® VAC-MOUNT™ Portable Vibrators are available in a variety of sizes including impacting, non-impacting and high-frequency models.

Contact Us for Free Application Assistance

Our team of trained and experienced technicians are available to help you determine the right solution for your challenge FREE OF CHARGE. Contact us today!


MARTIN® VAC-MOUNT™ Portable Vibrators, portable hopper vibrator


Easy To Use

Lightweight units provide “one worker” portability. The largest, most powerful unit weighs less than 37 lbs. All the controls required to operate the vibrator and mount are included.

Eliminates Guesswork

The vacuum mount helps pinpoint the best position for the placement of permanent vibrator installations.

Vibrates Portable Hoppers

Locate MARTIN® VAC-MOUNT™ assemblies at unloading stations. Instant attachment and controlled vibration eliminates destructive and expensive hammering.

Removes Residue Quickly

Attach a unit between batches to quickly and efficiently remove residue, reducing product waste and labor.



Click on any row to learn more about that product.



  • Tote Bins
  • Batch Storage Containers
  • FIBC Loading & Unloading
  • Barrel Compaction
  • Tilt Tables
  • Bins & Hoppers
  • Rail Cars
  • Trucks
  • Chutes
  • Plastic Containers
  • Corrugated Paper Containers
  • Pipes

Use For

  • Unloading
  • Compaction
  • Cleaning
  • Testing

We Have Models For

  • Non-Impacting Linear: General purpose
  • Rotary Turbine: Fine, dry powders
  • Impacting: Cleaning storage vessels and moving sticky materials


Case Studies

  • Case Study: Broken Glass Buildup – VAC-MOUNT™ Vibrator


    A large plate glass manufacturer in Toronto was dealing with two problems: broken glass in a scrap reclaim bin not vacating, and compensation claims for back injuries resulting from the periodic cleaning of this bin.


    Except for scheduled maintenance or breakdown, the line is never shut down. Thus, when the glass is not being cut and stacked, the material is “thrashed” and recycled. It was at this station the problem existed. The bin, approximately 8’ wide by 30’ long, had less than a 2-1/2′ drop (roughly 5°). The operators were using long poles to push the glass shards to the discharge, which periodically resulted in a back injury claim.


    Demonstration was key in showing the customer the solution to their problem. Even though there was noise from the thrasher, the customer may now vibrate and clean this bin during cutting and stacking without excessive noise from piston type vibrators.