Railcar Products
POCKET ROCK-IT^® Railcar Vibrators

Light weight & quiet!
No more pounding on railcars with sledge hammers! No more lifting heavy vibrators! No more ear-splitting noise! The patented POCKET ROCK-IT^® Railcar Vibrators utilize lightweight, high-performance vibrators to unload even the most stubborn materials from closed top hopper cars. Both models weigh less than 32 lbs., greatly reducing the risk of back injury.

No brackets on your cars? No problem!
We have a variety of MARTIN® VAC-MOUNT™ Vibrators that will do the job.

Pocket Rock-it® (U.S. Patent #5,833,205)	Pocket Rock-it II™
Weight -32 lbs. Air consumption-15 cfm. Noise 70-85 dBA. Included with unit –NTS 50/04 vibrator, wedge bracket with urethane shoe, 5' hose whip with 3-way valve, filter, lubricator and regulator.	Weight -22 lbs. Air consumption-34 cfm. Noise 60-85 dBA. Included with unit –NCT 250i vibrator, wedge bracket, 5' hose whip with 3-way valve, filter, regulator and ambient air dryer.

.

Quiet
Noise levels are 60 - 75 dBA, well below regulatory limits.

Reduce Risk of Back Injury
The POCKET ROCK-IT^® assembly weighs
in at 32 lbs, POCKET ROCK-IT II^® models tip the scales at 20 lbs. Operators no longer have to manhandle heavy vibrators into hard-to-reach brackets under railcars.

3-year Guarantee
Both models are covered by a 3-year guarantee.

Free On Site Testing
POCKET-ROCK-IT^® railcar vibrators are available for testing, at your site, on your cars.

Additional Specifications

• Air pressure range
  30-80 psi
• Operating temperature
  0º-120º F.
• Air Preparation
  5-micron filter, pressure regulator & lubricator. 3-way valve.
• Warranty
  3-years when operated within recommendations.
• Testing
  Both models are available for on site testing.