Mount kits include mount bracket, fasteners and
safety cable. Standard brackets are fabricated
from cold-rolled carbon steel.
H-Mount
The "H" is
the standard weld-on mount for bins and hoppers.
All units are available in stainless steel and aluminum
as well as standard cold-rolled steel.
Stand-Off High Temp & Adaptor Brackets
These brackets were developed with two applications in mind:
Retrofit new vibrators to existing mounts without having to weld.
High temperature applications where the vibrators must be located away from
the heat source.
Martin® Glue Mount™ System
Can't weld on a bracket?
Try the glue mount. Try the unique MARTIN®
GLUE-MOUNT™ System. Special brackets
are designed to be used with our high-performance,
two-component adhesive. Simply clean the surface,
apply the glue to the bracket, and hold in place
for 10 minutes. The bracket will be ready for
use in 24 hours. This mount is best used on flat
surfaces with the MARTIN® PKL™
Interval Impactors.
Additional Photographs
SPECIAL BRACKETS AVAILABLE FOR
ALL APPLICATIONS
SPECIAL MOUNT USED FOR ELECTRIC
VIBRATORS ON GRIZZLY
PKL® 135 IMPACTOR MOUNTED ON CONE
TWO NCT 250 TURBINE VIBRATORS
MOUNTED ON LARGE VESSEL
